Alcatel Lucent Access Point Gestiti (Controllati)
201H-RW - Multifunctional Alcatel-Lucent OmniAccess Stellar AP1201H access point

Multifunctional Alcatel-Lucent OmniAccess Stellar AP1201H access point
Per applicazioni in camera, ad es. in hotel, aule, dormitori, cliniche, uffici remoti / domestici e altro ancora.
Supports 802.11ac Wave 2 and Multi-User-MIMO (MU-MIMO)
Power supply via Power over Ethernet (IEEE 802.3at/802.3af)

Caratteristiche tecniche

Posizionamento Indoor

Possibilità di essere anche controllato Sì

Unmanaged / Autonomo Sì

Cifratura Wireless

DHCP/DNS/NAT
Wireless MESH P2P/P2MP
Wireless Bridge

?AP type: Indoor, dual radio, 5 GHz
802.11ac 2x2:2 MU-MIMO, and 2.4
GHz 802.11n 2x2:2 MIMO
5 GHz: Two spatial stream multi user MU-MIMO for up to 867 Mb/s wireless data rate, simultaneous data transmission for up to 2 devices
2.4 GHz: Two spatial stream single user (SU) MIMO for up to 300 Mb/s wireless data rate to individual 2x2 HT40 client devices
Supported frequency bands (country- specific restrictions apply):
¬ 2.400 to 2.4835 GHz
¬ 5.150 to 5.250 GHz
¬ 5.250 to 5.350 GHz
¬ 5.470 to 5.725 GHz
¬ 5.725 to 5.850 GHz
Available channels: Dependent on configured regulatory domain
DFA (dynamic frequency adjustment) optimizes available channels and provides proper transmission power
Short guard interval for 20 MHz, 40 MHz and 80 MHz channels
Transmit beam forming (TxBF) for increased signal reliability and range
802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU)
Supported data rates (Mb/s):
¬ 802.11b: 1, 2, 5.5, 11
¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
¬ 802.11n: 6.5 to 300 (MCS0 to
MCS15)
¬ 802.11ac: 6.5 to 867 (MCS0
to MCS9, NSS = 1 to 2 for
VHT20/40/80)

Caratteristiche fisiche

Formato Chassis Desktop

Colore Chassis Bianco

Altezza massima 34, 45 mm

Larghezza massima 95 mm

Profondità massima 161, 5 mm

Peso 239 Gr

Alimentazione

Power Supply AC/DC

Supporto POE 802.3af Sì

Power Supply Tensione 220 V

Power Supply Frequenza 60 Hz

Wireless

Banda di frequenza 2.4GHz & 5GHz dual band Ghz

Velocità Wireless 4804 Mbps Mbps

Wireless Security Sì

Connettore antenne opzionali N

Conformità Wireless

AP1201H: Built-in 2×2:2 @ 2.4 GHz,
2x2:2 @ 5 GHz
¬ Two integrated dual-band omnidirectional antennas for 2x2 MIMO
with maximum antenna gain of
4 dBi in 2.4 GHz and 6.3dBi in
5 GHz.

ConnettivitÀ

Numero porte LAN 2 N

Velocità LAN 1.000 Mbps

Connettori porte LAN RJ-45

Conformità LAN

IEEE standard
IEEE 802.11a/b/g/n/ac Wave 2
IEEE 802.11e WMM
IEEE 802.11h, 802.11i, 802.11e QoS
IEEE 802.1Q (VLAN tagging)
802.11k Radio Resource Management
802.11v BSS Transition Management
802.11r Fast Roaming

Porta Console No

Conformità LAN

IEEE standard
IEEE 802.11a/b/g/n/ac Wave 2
IEEE 802.11e WMM
IEEE 802.11h, 802.11i, 802.11e QoS
IEEE 802.1Q (VLAN tagging)
802.11k Radio Resource Management
802.11v BSS Transition Management
802.11r Fast Roaming

ConformitÀ

Dichiarazione di Conformità

Security
802.11i, Wi-Fi Protected Access 2
(WPA2), WPA, AES 128-256 bits
802.1X
Dynamic WEP, Advanced Encryption
Standard (AES), Temporal Key
Integrity Protocol (TKIP)
Firewall: ACL, wIPS/wIDS
Portal page authentication
IEEE standard
IEEE 802.11a/b/g/n/ac Wave 2
IEEE 802.11e WMM
IEEE 802.11h, 802.11i, 802.11e QoS
IEEE 802.1Q (VLAN tagging)
802.11k Radio Resource Management
802.11v BSS Transition Management
802.11r Fast Roaming
Regulatory & certification
CB Scheme Safety, cTUVus
Wi-Fi Alliance (WFA) certified
802.11a/b/g/n/ac
FCC
CE marked
RoHS, REACH, WEEE
UL2043 plenum rating
EMI and susceptibility (Class B)
Wi-Fi CERTIFIED Wi-Fi 5, Enhanced
Open, Passpoint®

Confezione

Cavi Inclusi

Mounting
The AP ships with a mounting plate to attach the AP to a single-gang wallbox (most international variations covered) 

Software

no

Kit e Accessori Vari

Optional mount kit for desk mount. cod.OAW-AP-MNT-DSK  OmniAccess desk mounting kit, for AP1201H. Optional for customer ordering.